27 lines
1.0 KiB
Markdown
27 lines
1.0 KiB
Markdown
Welcome to the jungle
|
|
======
|
|
|
|
Firmware for the Panda Jungle testing board.
|
|
Available for purchase at the [comma shop](https://comma.ai/shop/panda-jungle).
|
|
|
|
## udev rules
|
|
|
|
To make the jungle usable without root permissions, you might need to setup udev rules for it.
|
|
On ubuntu, this should do the trick:
|
|
``` bash
|
|
sudo tee /etc/udev/rules.d/12-panda_jungle.rules <<EOF
|
|
SUBSYSTEM=="usb", ATTRS{idVendor}=="bbaa", ATTRS{idProduct}=="ddcf", MODE="0666"
|
|
SUBSYSTEM=="usb", ATTRS{idVendor}=="bbaa", ATTRS{idProduct}=="ddef", MODE="0666"
|
|
EOF
|
|
sudo udevadm control --reload-rules && sudo udevadm trigger
|
|
```
|
|
|
|
## updating the firmware
|
|
Updating the firmware is easy! In the `board/jungle/` folder, run:
|
|
``` bash
|
|
./flash.py
|
|
```
|
|
|
|
If you somehow bricked your jungle, you'll need a [comma key](https://comma.ai/shop/products/comma-key) to put the microcontroller in DFU mode for the V1.
|
|
For V2, the onboard button serves this purpose. When powered on while holding the button to put it in DFU mode, running `./recover.sh` in `board/` should unbrick it.
|